Equipment Overview:

When the material rotates at high speed in the grinding chamber, the material particles rub against each other, and the particles will become smaller and smaller. When the single centrifugal force is less than the force generated by the central discharge gas flow, the material will be carried out of the discharge port with the air flow.

Working principle:

Feeding: the raw materials are fed evenly through the feeder, and the gas injected through the feeding port generates negative pressure and is sucked into the grinding chamber.

Grinding: the materials rotate at high speed in the cavity along the set direction, so that the materials collide and rub with each other to grind the materials.

Collection: most of the crushed ultra-fine materials enter the storage container.

Dust removal: a small part of materials are brought to the dust remover, filtered and discharged with clean air.

Purpose:

★ it is suitable for dry ultrafine grinding of various brittle, crystalline, heat sensitive and medium and low hardness materials.

★ it is used in chemical, pharmaceutical, food and other industries with high efficiency and no dust leakage.

★ target particle size 1 ~ 50 μ The whole grain of various particles between M.

Technical features:

● low temperature medium free crushing, especially suitable for crushing heat sensitive, low melting point, sugary and volatile materials.

● equipped with precise powder feeding mechanism with weighing feedback control, which can accurately feed powder.

● equipped with air flow nozzles with three angles, which can be applied to the crushing of a variety of materials with different properties.

● the whole system is sealed and crushed, with less dust and low noise, and the production process is clean and environment-friendly.

● each component can be disassembled without dead corner, which is convenient for cleaning and disinfection; The installation is simple and fast, and the operator is easy to master.

Technical parameters: