Working principle:

Using the high-speed relative movement between the rotor and the screen, the machine quickly granulates the block like materials through the screen hole under the rolling of the rotor, and the finished particles are discharged instantly, with less heating, high efficiency and good quality. Variable frequency speed regulation is adopted, the spindle speed is adjustable, the range is wide, the lower drive is adopted, and the feeding is smooth. The contact parts and appearance parts of the machine with materials are made of high-quality stainless steel, and the surface is polished. It can be used together with wet granulator and fluidized bed drying equipment respectively.

Purpose:

Mainly for wet pelletizing and spray granulation and other lump shaped materials and unqualified tablets, according to particle size requirements for whole grain. It can also be used for crushing and recycling of food and biscuits, as well as crushing and whole grain of other coarse raw materials. It is an ideal equipment for processing low viscosity block, tree glue and wet materials.

Technical features:

● the lifting mechanism can be configured to realize the closed connection with wet granulation.

● modular design is adopted, and dry and wet granulation can be realized by replacing the granulation knife and screen; Quantitative feeding mechanism can be configured to improve the consistency of particle size; It can be equipped with closed silo to reduce dust leakage.

● three types of whole grain knives can be applied to the whole grain of a variety of materials with different properties.

● the screen opening is as small as φ 0.4mm, high opening rate, no dead corner; The whole particle size is fine and the material passing rate is high, which can effectively reduce the occurrence of material heating and is easy to clean.

● high accuracy of screen aperture, accurate and controllable gap between the pelletizing knife and screen, and accurate control of particle size distribution of materials after pelletizing.

● self designed right angle transmission system and shaft seal technology reduce the risk of material pollution.

● the whole working cavity has smooth transition without dead corner, smooth material, less residue and high yield.

● the whole machine is connected by quick mounting clamp, which is simple and fast for disassembly and installation and easy for operators to master.

Technical parameters: